APC ACRC301S Guida Utente Scaricare il pdf (Pagina 37)

Network Management Card: Quick Configuration

InfraStruXure InRow RC—Operation and Maintenance 31

Remote access to the control console

From any computer on the same subnet as the Network Management Card’s, you can use ARP and Ping

to assign an IP address to a Network Management Card, and then use Telnet to access that Network

Management Card’s control console and configure the other TCP/IP settings.

1. Use ARP to define an IP address for the Network Management Card, and use the Network

Management Card’s MAC address in the ARP command. For example, to define an IP address of

156.205.14.141 for a Network Management Card that has a MAC address of 00 c0 b7 63 9f 67, use

one of the following commands:

– Windows command format:

arp -s 156.205.14.141 00-c0-b7-63-9f-67

– LINUX command format:

arp -s 156.205.14.141 00:c0:b7:63:9f:67

2. Use Ping with a size of 113 bytes to assign the IP address defined by the ARP command. For the IP

address defined in step 1, use one of the following Ping commands:

– Windows command format:

ping 156.205.14.141 -l 113

– LINUX command format:

ping 156.205.14.141 -s 113

3 .Use Telnet to access the Network Management Card at its newly assigned IP address. For example:

telnet 156.205.14.141

4. Use apc for both user name and password.

5. See “Control console” on page 32 to finish the configuration.

Note

After a Network Management Card has its IP address configured, you can use Telnet,

without first using ARP and Ping, to access that Network Management Card.

Note

For the MAC address, look on the nameplate of the InRow RC. The MAC

address is also available on the display interface at:

Path: Main > Cooling Unit > Network.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Nessun commento

APC ACRC301S Guida Utente Pagina 37