APC NetBotz 200 Guida Utente Scaricare il pdf (Pagina 49)

USER’S GUIDE

NetBotz Rack Monitor 200

Relay Output page

Select the Outputs tab and then the top menu item Relay Output to configure the

relay output. Enter the name and location in the appropriate fields. Set the normal state

of the output, open or closed.

To change the state of the output manually, select the setting in the Control field.

To map a device alarm to activate a relay: The relay can be activated only by the

alarm states of sensors connected to the Main Module.

1. In the section Mapping: Alarm Reaction, select the alarm states that will

activate the relay.

2. By default, all sensors connected to the Main Module are mapped to activate

the relay output when in an abnormal state. Click the name of the abnormal

state to view the sensors connected to the module.

3. Select devices to include in the alarm. Any selected device, in its abnormal

state, activates the relay.

4. Click Apply.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 124 125

Nessun commento

APC NetBotz 200 Guida Utente Pagina 49